Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Drive wall anchors are medium duty fasteners for use in drywall, plaster, and tile. The two prongs on the head of the shell prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Drive wall anchors are medium duty fasteners for use in drywall, plaster, and tile. The two prongs on the head of the shell prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall.

Drive wall anchors are medium duty fasteners for use in drywall, plaster, and tile. The two prongs on the head of the shell prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall.

Toggle Wings are designed to be used with machine screws for anchoring items on hollow walls. Wings are typically much larger or more bulky than the bolt they are used with. This works perfectly to distribute the weight of the load across a larger area

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Toggle Wings are designed to be used with machine screws for anchoring items on hollow walls. Wings are typically much larger or more bulky than the bolt they are used with. This works perfectly to distribute the weight of the load across a larger area

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Toggle Wings are designed to be used with machine screws for anchoring items on hollow walls. Wings are typically much larger or more bulky than the bolt they are used with. This works perfectly to distribute the weight of the load across a larger area

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Pan Head Combo-Drive Hollow Wall Anchors are used to securely fasten mirrors, pictures, and cabinets to hollow wall materials such as drywall. This anchor is an expandable sleeve that slides into a pre-drilled hole in the wall. Once the anchor is installed, the screw can be removed and items can be changed without disrupting the anchor.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Wallboard anchors are a one-piece, self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is ideal for mounting electrical fixtures, fastening drapery supports, installing phone systems and miscellaneous hardware. Kit contains: #8 Nylon Anchors (25pcs.), Phillips sheet metal screws (25pcs.), and a #2 Phillips Bit.

Wallboard anchors are a one-piece, self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is ideal for mounting electrical fixtures, fastening drapery supports, installing phone systems and miscellaneous hardware. Kit contains: #8 Zinc Anchors (25pcs.), Phillips sheet metal screws (25pcs.), and a #2 Phillips Bit.

Toggle Wings are designed to be used with machine screws for anchoring items on hollow walls. Wings are typically much larger or more bulky than the bolt they are used with. This works perfectly to distribute the weight of the load across a larger area

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Pop Toggles work with various diameter sheet metal screws. They are ideal for anchoring into hollow base materials such as drywall, plaster, and tile. The anchor is corrosion resistant, and is recommended to be installed in a pre-drilled hole

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Toggle Wings are designed to be used with machine screws for anchoring items on hollow walls. Wings are typically much larger or more bulky than the bolt they are used with. This works perfectly to distribute the weight of the load across a larger area

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Pop Toggles work with various diameter sheet metal screws. They are ideal for anchoring into hollow base materials such as drywall, plaster, and tile. The anchor is corrosion resistant, and is recommended to be installed in a pre-drilled hole

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Formed from engineered nylon and drive nails, Truss-Head Nylon Anchors are a fastening system that consists of two parts. It is installed by inserting the nylon shank into a pre-drilled hole and hammering the head of the nail until it meets the head of the anchor body. Driving the nail expands the split ends and allows the ribs to grip the wall of the hole.

Pull Toggle anchors are fast-installing heavy duty hollow wall anchors. The design consists of the anchor head, a plastic strap and a sleeve nut. Pull Toggle anchors are adjustable and work in various hollow wall depths. They enable a wide variety of grip ranges and are ideal for use when the depth of the material is unknown.

Pull Toggle anchors are fast-installing heavy duty hollow wall anchors. The design consists of the anchor head, a plastic strap and a sleeve nut. Pull Toggle anchors are adjustable and work in various hollow wall depths. They enable a wide variety of grip ranges and are ideal for use when the depth of the material is unknown.

Ideal for anchoring in concrete, brick, or wallboard, ribbed plastic anchors work well with various diameter sheet metal screws. Recommended for quick, easy fastening of fixtures in a variety of light duty applications. Kit contains: #12-14-16 x 1-1/2" (50pcs.), Phillips sheet metal screws (50pcs.), and a 5/16" Drill Bit.

Ideal for anchoring in concrete, brick, or wallboard, ribbed plastic anchors work well with various diameter sheet metal screws. Recommended for quick, easy fastening of fixtures in a variety of light duty applications. Kit contains: #12-14-16 x 1-1/2" (50pcs.), Phillips sheet metal screws (50pcs.), and a 5/16" Drill Bit.

Ideal for anchoring in concrete, brick, or wallboard, ribbed plastic anchors work well with various diameter sheet metal screws. Recommended for quick, easy fastening of fixtures in a variety of light duty applications. Kit contains: #12-14-16 x 1-1/2" (50pcs.), Phillips sheet metal screws (50pcs.), and a 5/16" Drill Bit.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Pop Toggles work with various diameter sheet metal screws. They are ideal for anchoring into hollow base materials such as drywall, plaster, and tile. The anchor is corrosion resistant, and is recommended to be installed in a pre-drilled hole

Ideal for anchoring in concrete, brick, or wallboard, Conical Plastic Anchors work well with various diameter sheet metal screws. Use these anchors for general, light-duty, static applications where holding power is not critical. Kit includes anchors, screws, and a drill bit for installation.

Ideal for anchoring in concrete, brick, or wallboard, Conical Plastic Anchors work well with various diameter sheet metal screws. Use these anchors for general, light-duty, static applications where holding power is not critical. Kit includes anchors, screws, and a drill bit for installation.

Ideal for anchoring in concrete, brick, or wallboard, Conical Plastic Anchors work well with various diameter sheet metal screws. Use these anchors for general, light-duty, static applications where holding power is not critical. Kit includes anchors, screws, and a drill bit for installation.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

Ideal for anchoring in concrete, brick, or wallboard, Conical Plastic Anchors work well with various diameter sheet metal screws. Use these anchors for general, light-duty, static applications where holding power is not critical. Kit includes anchors, screws, and a drill bit for installation.

Round Head Machine Screw Toggle Bolts are intended for anchoring into hollow walls. The spring-action wings disperse the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.