75370-FOUR WAY TIRE VALVE
Repairs core and stem threads. Features core screw driver and broken core extractor. Carded
Online Purchasing Coming Soon
HOSE END, 1/4 IN - 1/4 IN MNPT
All brass air hose end with male national pipe thread (MNPT) and barbed ends for air hose.
Online Purchasing Coming Soon
75361-HOSE SPLICER FITS
Dual barbed hose splicer for air hose. All brass construction. Carded
Online Purchasing Coming Soon
AIR PLUG "A" 1/4"MNPT
This design is identified by a 5/16" pilot and ball groove which is nearly round. It is similar in appearance to the Industrial interchange and care must be taken to correctly identify it. Couplers are available in both standard and push-to-connect style sleeve.
- Heat treated, cast and machined, plated steel construction offers high strength, durability
|
- Corrosion resistance
|
75474-3/8" IND X 3/8" FPT
3/8" (6.35mm) plug. Steel construction. Max working pressure: 300 PSI. Carded
Online Purchasing Coming Soon
75475-3/8" TRU-FLATE DESIGN
1/4" (6.35mm) plug. Steel construction. Max working pressure: 300 PSI. Carded
Online Purchasing Coming Soon
75306-3/8"TRU-FLATE DESIGN
3/8" (6.35mm) plug. Steel construction. Max working pressure: 300 PSI. Carded
Online Purchasing Coming Soon
AIR CHUCK
Direct line with built-in shut-off valve and 1/4" FNPT. Max air line pressure: 150 PSI. Carded
Online Purchasing Coming Soon
75307-3/8"IND DESIGN X 3/8"
3/8" (6.35mm) plug. Steel construction. Max working pressure: 300 PSI. Carded
Online Purchasing Coming Soon
75357-HOSE SPLICER, FITS
Dual barbed hose splicer for air hose. All brass construction. Carded
Online Purchasing Coming Soon
TIRE GAUGE ANGLED ECONOMY
Angled Tire Gauge, 10-50 PSI, Economical. Calibrated in 1lb increments. Carded.
Online Purchasing Coming Soon
TIRE GAUGE TRUCK ANGLED
Angled Tire Gauge, 20-120 PSI, Economical. Calibrated in 2lb increments. Carded.
Online Purchasing Coming Soon
AIR COUPLER "A" 1/4"FNPT
This design is identified by a 5/16" pilot and ball groove which is nearly round. It is similar in appearance to the Industrial interchange and care must be taken to correctly identify it.
- Plated steel couplers are resistant to rust for lasting use
|
- Coupler plugs are heat treated to reduce wear on critical mating surfaces
|
- Can be easily identified by the distinct appearance of the plug
|
- Fits any 1/4" ARO design plug
|