Submit search
General purpose mild steel 3/32" (2.38mm) x 36" (914.4mm) high quality mild steel welding rod for repair of low carbon steels. (2.27 Kg). Copper coated rod has .06% max carbon and .17% max manganese. Great rod for projects around the house or commercial use.
Low Fuming Bare Brass, Gas Brazing Rod 1/8" X 36"
High quality low fuming bronze brazing rod with flux. Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing applications. Flux coated for best cleaning action.
An excellent flux that cleans well to allow for good, solid brazing jobs. 1/2 lb. (14.17g). Borax type. Excellent cleaning flux for use with all flame torches. Comes in easy to use, re-sealable tube.
Excellent for sheet metal and ornamental iron work on poorly fitted joints. "High deposition."
E6013 steel electrodes are ideal for all-purpose and all-position welding. These rods are great for light gauge metal, sheet metal, duct work and all types of mild steel fabrication! These rods produce excellent wetting action, yielding smooth and flat beads with steady arc with either AC or DC operations. Use these electrodes on mild steel where ease of operation and good appearance is required.
6011, 3/32" deep penetration welding rod is ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting.
6011, 1/8" deep penetration welding rod is ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting.
E7018 mild steel low hydrogen welding electrodes easily produce quality results on smaller amperage DC, or higher amperage AC welders. Use for field erections, steel structures, frames, trailer hitches and chassis.
Made of high impact polypropylene plastic. Includes four internal compartments to separate rod. Features a screw-type cap and rubber O-ring for a clean, air-tight storage for electrodes.
E7018 AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders. It is suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
E7018 AC mild steel "Low Hydrogen" welding rod easily produce quality results on smaller amperage AC/DC welders. It is suitable for all positions on harden able steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
Supercote hard facing specialty welding electrodes are excellent low cost rods for moderate abrasion and low impact application in all positions. It can be forged and provides a crack resistant weld. It features a smooth arc action and easy slag removal. Typical applications include surface buildup on new or worn machine parts of cast steel and manganese steel.
E6013 mild steel "General Purpose" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work, etc.
Stick Electrodes E6013,"General Purpose" Mild Steel 1/16" 1 Lbs.
WELD ROD 5/32" 6011 5#
This E71T-GS Self flux-core welding wire for mild steel is ideal for all-position welding, and best suited for single pass applications with high travel speed. Pink color coding on label. No shielding gas required.
Nomacast non-machinable cast iron specialty welding electrodes feature a non-conductive coating that is specially developed for welding dirty, heat-affected and oxidized cast iron. Ideally suited to cladding contaminated casting prior to joining with high nickel alloys. Non-machinable. Typical applications include machine bases, pedestals, frames and housings where heat and machinability are not an important factor.
HOLDER ELECTRODE 200AMP
ER4043 aluminum MIG (GMAW) welding wire features 5% silicon content and a bright finish. Flows freely at 1,155° F (624° C). Works well with spool guns. For truck bodies, pressure vessels and structural members.
Electrode Holder, Screw-type, 400 Amp, Medium Duty.
E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs.
E6011, 3/32" deep penetration welding rod is ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting.
E6011, 5/32" deep penetration welding rod is ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting.
Specialty welding electrodes recommended for repairing worn parts and as an underlay for hard facing. Ideal for repairing tools, dies, spring steel, and any dissimilar metal combinations (not recommended for aluminum and copper alloys). Chemistry offers excellent crack resistance.
Ideal for field erections, steel structures, frame, trailer hitches and chassis. Low hydrogen.
This medium-duty, 200 AMP electrode holder holds the stick electrode and transfers the welding current to the rod. This rod holder is easy to use, and accepts up to No.2 welding cable and 5/32" electrodes. Insulated for safety and maximum operator protection.
All-position 6011 welding rod ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting.
1/16" (1.59 mm) ER309L stainless steel TIG (GTAW) filler metal. Contains silicon additives which results in improved fluidity (wetting action) of the weld pool and provides a weld less sensitive to cracking. Consists of less than .03% carbon for added corrosion resistance. Recommended for most dissimilar metals. Works well for dissimilar joints that will undergo heat treatment.
Super wear heavy abrasion specialty welding electrodes are ideal for parts that require a high level of durability because of high-impact and medium abrasion. Special formula eliminates "Worm Tracking" type porosity common to this alloy group. Heat treatable.
ER70S-6 MIGWIRE.024X10LB
Brazing alloy that is ideal for large and small copper tubing installations. Self-fluxing on copper. Typical applications include: Refrigeration control valves (copper and brass), joining copper wires to rotor bars, electrical connections, radiant heating systems, air conditioning units, hot and cold water lines, and heat exchanges. T-joints, swage joints and sleeves, couplings on return bends and condenser fittings. Sil-Flo is not recommended for ferrous metals such as iron or steel. It is only for copper base metals as an effective economical alternative to copper-silver alloy rods.
Electrode Holder, 300 Amp, Medium Duty.
Ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting. "Deep Penetration."
E7018 AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders. It is suitable for all positions on harden able steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
ER70S-6 mild steel MIG welding wire is a high strength mild steel MIG wire. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Requires CO2 or Argon/CO2 shielding gas (not included).
ER70S-6 mild steel MIG welding wire is a high strength mild steel MIG wire. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines.
E6011 mild steel welding electrodes are ideal for all-position welding. These rods are ideal for galvanized tanks, truck frames, pressure pipe, railroad cars, shipbuilding and steel casting. They are dependable and ideal for AC operations, and can additionally be used with DC+.
General purpose mild steel: 1/8" (3.18mm) x 36" (914.4mm) high quality mild steel welding rod for repair of low carbon steels. (2.27 Kg). Copper coated rod has .06% max carbon and .17% max manganese. Great rod for projects around the house or commercial use.
Back to top